Jan 18 , 2019
Sticking Door No More!
Badly aligned rollers inside the bottom of a patio screen door will cause the door to bind or stick when opening or closing. This stresses the corners of the door, and if the corner joints become loose, the door will eventually fall apart. But you can adjust the door to glide smoothly with just a screwdriver. You’ll find two adjustment screws at the bottom of the door, one at each end, that raise or lower separate rollers. Adjust them as shown here.
- Lower the door. Turn the adjustment screw counterclockwise and lower the door until it rests on the track. Do the same at the other end of the door.
- Then raise it one roller until it lifts the door about 1/4 in. off the track. Slowly raise the other roller until there’s an even gap between the door and the track.
Get your window screens in shape for summer with this simple screen repair project. We’ll walk you through it.