Apr 01 , 2019
About this Bookcase Project
The classic Greek Revival styling of our library is reminiscent of traditional bookcases built more than a hundred years ago. The bookcases look ornate but are relatively simple to build. There’s no complex joinery like mortise-and-tenon, or even doweling, so if you’ve hung a new door or trimmed a room with new molding, you have the expertise to handle this how to build a bookshelf project.
We measured our bookcase for standard 8-ft. Ceilings.
We sized the bookcases to fit into a typical room with an 8-ft. ceiling and at least 8 ft. of wall space, something like a typical bedroom you may want to convert to a library or home office. It can also be expanded by adding standards (the upright partitions; see Fig. B).
This Project Will Work in Any Room.
We’ve engineered this project to work even if your room is a bit out of kilter. The moldings are applied after the main standards are installed to cover any gaps resulting from uneven floors or walls. At the end of this article, in “Additional Information,” you’ll find lists of the tools and materials you’ll need to complete this project. Even though this project isn’t complicated, it’s still going to take you at least 40 hours to build.
A bookcase or shelf is an extremely useful home storage system. In this collection, you’ll discover 33 project plans and learn building tips to maximize your bookcase or shelf’s storing capacity.
Video: DIY Hiding Place From Old Books
Plan Ahead and Measure Your Location
As you can see, the center section of our bookcases is 6 in. wider than the two outer sections. This establishes a focal point, and the two side sections provide symmetry. However, this exact design may not work for your room. To check, carefully measure the height and width of the wall of your selected site. Take into consideration the height, width and any obstructions unique to your room. Note the locations of all receptacles, switches and vents. They may require you to modify our design. Keep in mind, you can move the standards (Fig. B) closer together or add another standard or two to fit a longer wall.
Like we said above, as you plan, note the location of your electrical receptacles and heating ducts. They may dictate where you place the standards. Your only other absolute is that the ladder support rod should not span more than 36 in. between brackets. Use a level to check for irregularities like a sloping floor or an uneven wall. If your walls and floor aren’t exactly straight or level, you’ll be able to scribe the standards on the backside and bottom, and then cut along your scribe for a perfect fit (see How to Scribe for a Perfect Fit for more on scribing).
If you Include a Ladder in Your Design:
If you decide to include the ladder in your design, be aware that it could take several weeks for delivery. This shouldn’t slow you down—you can get started with the project and install the ladder when it arrives.
What Type of Flooring is in Your Room?
Our bookcases were built onto a wood floor. If you have carpeting, you’ll need to pull back the carpet and pad and reinstall them later around the base of the bookcases. And yes, the ladder will roll on carpeting as well.