Apr 30 , 2020
How to Build a DIY Tree Swing
Note: All do-it-yourself activities involve a degree of risk. Skills, materials, tools and site conditions vary widely. Although we have made every effort to ensure accuracy, the reader remains responsible for the selection and use of tools materials and methods. Always obey local codes and laws, follow manufacturer’s operating instructions and observe safety precautions.
Clip and Cut the Corners
- Make a mark at 1-1/4 in. from the end of the board, at each corner.
- Use a square to draw a 45-degree angle on all four corners.
- This step eliminates sharp corners that could scrape little legs!
- Cut the corners along the lines you drew, using your saw of choice.
- I used a circular saw.
