Mar 11 , 2019
Build the two side ladders for the workshop stool
To begin building this simple workshop stool, cut the pieces to length, then glue and screw the crosspieces to the legs. Use a square to ensure the assemblies are square. Begin by building the two side ladders using the spacing shown in Figure A. Use a square to ensure each ‘rung’ is square to the leg, then secure each using glue and 1-1/4-in. screws. Use a 1/4-in. round-over bit to soften the outer edges of each leg. Stand the two ladder sides facing each other and install the two steps and the back brace. Predrill the holes to prevent splitting.