1 x Receiver
1 x Doorbell
1 x 3 Volts CR2032 battery for Doorbell
3 x Wall Plugs
3 x Screws
1 x Instruction Manual
1. Door Chime Operation
Press the push button on the doorbell once, a sounding wireless signal will be sent to the receiver. The sound will stop as soon as the melody ends. For repeated sound, press the button again. Hold the button on, the sound repeat stops.
2. Melody Selection
There’s a melody selector located at right on the back of the door chime. Press the selector to transform different melodies.
3. Sound and Flash
There’s a switch at left on the back of the Receiver. Slide the switch to left, the Receiver will work only with sound; slide to middle, only LED flash; slide to right, sound and LED flash.
4. Volume Adjustment
There’s a volume button between melody selector and sound-and-flash switch. Press it to adjust the sound volume to be high, medium and low.
5. Auto-learning Code Button
There is an auto-learning code button on the edge side of the receiver. If you need an additional doorbell to work with the Receiver, just press the auto-learning code button once and the doorbell can work with the Receiver.
There’s a nameplate position on the doorbell.
Power: 1 x 3 Volts CR2032 battery (included)
Power: 2 x 1.5 Volts AA alkaline batteries (not included)
Operating Temperature: -30℃ to +40℃
Operating Distance: 300 feet in the open air
Selectable Tone: 36 Polyphonic Melodies
Digital Code Type: Auto-learning
Easy Chime Design – Lead-free, non-toxic, low power consumption & piano black surface.
Huge Performance Range – Wherever you are in your home, up to 100m/300ft performance range ensures you to hear the bell and answer the door in time.
A couple of Volume Option – 3 levels of adjustable ringing volume over than 85dB within 0.5m/1.6ft, 36 different chimes and three chime modes: Chime, Flash, Chime & Flash.
More Convenience – Every receiver works with up to 5 push buttons. Battery keep watch over receiver is thus made more convenient and the IP44 waterproof push button effectively increases its security.
Easy Installation – The chime unit can also be free standing or wall mounted with the included hardware, the push button can also be fixed to the doorframe with screws or the attached adhesive tapes.
Frequently Bought Together
This item: E-Projects - 2N2222 - General Purpose Transistor - NPN - TO-92 (25 Pieces)$4.99
Diymore NodeMcu Lua V2 CP2102 ESP8266 ESP-12E WiFi Module Wireless Micro USB Interface 4MB Internet of Things Development Board$6.98
Reusable Grocery Bags Bulk Large Reusable Shopping Bags Foldable Washable For Women - Fashion cute Reusable Gift Bag Girls Waterproof Eco Tote Bags Cheap Set Folding Carry Heavy Duty Grocery Nylon Bag$7.99
SDS plus bits, ZINMOND 11-Piece SDS-plus Rotary Hammer Drill Bits Set & 3-Piece Chisels, Carbide-Tipped Masonry Bit Set for BRICK, CEMENT, STONE$18.59